• Sekulic, D.P. (2013) Advances in Brazing: Science, Technology and Applications, Woodhead Publ., Cambridge, UK. 2013. ISBN 0 85709 423 8.
• Bakshi, B., Gutowski, T., Sekulic, D.P. (2011) Thermodynamics and the Destruction of Resources, Cambridge University Press, Cambridge, UK, 2011. ISBN 978-0-521-88455-6. Library acquisitions: more than 160 Libraries included in WorldCat (http://newfirstsearch.oclc.org) worldwide (July, 2012)
• Translation into Chinese of the Shah, R.K. and Sekulic, D.P. (2010) Fundamentals of Heat Exchanger Design, China Machine Press, Beijing, 2010. ISBN 978-7-111-28881-7 (translated by Cheng Lin into Mandarin, C(M)).
• Shah, R.K. and Sekulic, D.P. (2003) Fundamentals of Heat Exchanger Design, John Wiley, New York, ISBN 0-471-32171-0; (216 citations till 02/13 in Web of Science, ISI, 2016) for details see: http://www.wiley.com/WileyCDA/WileyTitle/productCd-0471321710.html Library acquisitions: more than 430 Libraries included in WorldCat (http://newfirstsearch.oclc.org) worldwide (July, 2012)
• S. G. Kandlik, G.P. Celata, H.M. Steinhagen, J. Barbosa, S.V. Alekseenko, Y. Chudnovski, P. Posklas, D.P. Sekulic, B. Spalding, and E. Son, Heat Exchanger Design Handbook, Vol. 1-4, D.P. Sekulic Editor for Vol. 1, 2 and Vol. 3, Begell House Inc., Redding, CT, 2009, USA. http://hedh.begellhouse.com/editorial/
• K. Saito (Editor), Sekulic D.P. (Editor in Section 3, Materials, Manufacturing and Environment) Progress in Scale Modeling, Springer Verlag, New York, 2008; ISBN 9781402086816 http://searbarnesandnoble.com/Progress-in-Scale-Modeling/Kozo-Saito/e/9781402086816
• R.J. Krane et al., co-edited by D.P.Sekulic, Thermodynamics and the Design, Analysis, and Improvement of Energy Systems, (1994) AES-Vol.33, ASME, New York, p.403.

• Sekulic, D.P. (2015) “Heat Exchangers, 1. Fundamentals and General Design Methodology” Manuscript # ueic-317 has been submitted online to Ullmanns Encyclopedia of Industrial Chemistry, December 1st 2014. Wiley-VCH Verlag GmbH & Co. KGaA.
• Sekulic, D.P. (2015) “Heat Exchangers, 2. Heat Transfer for Heat Exchanger Design” Manuscript # ueic-318 has been submitted online to Ullmanns Encyclopedia of Industrial Chemistry, December 1st 2014. Wiley-VCH Verlag GmbH & Co. KGaA. (in Print)
• Sekulic, D.P. (2015) “Heat Exchangers, 3. Phase Change in Heat Exchanger Design” Manuscript # ueic-319 has been submitted online to Ullmanns Encyclopedia of Industrial Chemistry, December 1st 2014. Wiley-VCH Verlag GmbH & Co. KGaA.
• Sekulic, D.P. (2015) “Heat Exchangers, 4. Auxiliary Issues in Heat Exchanger Design” Manuscript# ueic-320 has been submitted online to Ullmanns Encyclopedia of Industrial Chemistry, December 1st 2014. Wiley-VCH Verlag GmbH & Co. KGaA
• D.P. Sekulic (2013) Modeling of the sequence of phenomena in brazing, Chapter 3 in Advances in Brazing:Science, Technology, and Applications, Woodhead Publishing Lmt., Cambridge, UK, 2013, pp. 55-82.
• B. R. Bakshi, T.G. Gutowski, and D.P. Sekulic (2011) Introduction in the book: Thermodynamics and the Destruction of Resources (T.G. Gutowski, B. Bakshi and D.P. Sekulic), Cambridge University Press, pp. 1-14; ISBN 978-0-521-88455-6.
• T.G. Gutowski, D.P. Sekulic, and B.R. Bakshi (2011) Thoughts on the Application of Thermodynamics to the Development of Sustainability Science, Chapter 19 in Thermodynamics and the Destruction of Resources (T.G. Gutowski, B. Bakshi and D.P. Sekulic), Cambridge University Press, pp. 477-488; ISBN 978-0-521-88455-6
• T.G. Gutowski and D.P. Sekulic (2011) Thermodynamic Analysis of Resources Used in Manufacturing Processes, Chapter 6 in Thermodynamics and the Destruction of Resources (T.G. Gutowski, B. Bakshi and D.P. Sekulic), Cambridge University Press, pp. 163-189; ISBN 978-0-521- 88455-6
• Sekulic, D.P. (2011) An Entropy Based Metric for a Transformational Technology Development Chapter 5 in Thermodynamics and the Destruction of Resources (T.G. Gutowski, B. Bakshi and D.P. Sekulic), Cambridge University Press, pp. 133-162; pp. 45-86; ISBN 978-0-521-88455-6
• Sekulic, D.P. (2011) Energy and Exergy: Does one need both concepst for a study of Resources use, Chapter 2 in Thermodynamics and the Destruction of Resources (T.G. Gutowski, B. Bakshi and D.P. Sekulic), Cambridge University Press, pp. 45-86; ISBN 978-0-521-88455-6

2000-2009

• S. Loyd et al, D.P. Sekulic, Z. Zhang (2007) Discussion on "Frontiers of the Second Law ", in Meeting the Entropy Challenge, American Institute of Physics, ISBN 978-0-7354-0557-8, Melville, NY 2008, pp. 253-261.
• D.P. Sekulic (2008) Molten Metal Micro Layer Prior to Joint Formation during Brazing. Prolegomena for Scaling Analysis, in Progress in Scale Modeling, K. Saito Editor, Sektion 3 Editors,
• D.P. Sekulic et al., Springer Verlag, New York, 2008; ISBN 9781402086816,, pp. 391-402.
• D.P. Sekulic and Edeskuty, F.J. (2007) Superconductors “ Cryogenic Stabilization, in Wiley Encyclopedia of Electrical and Electronics Engineering, (Edited by John Webster), 2nd Edition (A revised invited chapter article €“ electronic media edition; The first editions in the encyclopedic hard copy version, and in a separate book, see below) Contributed Chapter (#1307) Wiley & Sons Inc., Hoboken, NJ, November 2006.
• Sekulic, D.P. (2005) Sizing of a Crossflow Compact Heat Exchanger, Heat Transfer Calculations, (Mayer Kutz, Editor, an invited chapter), McGraw Hill, New York, 2005, Chapter 29, pp. 29.1-29.31.
• D.P. Sekulic and Edeskuty, F.J. (2001) Superconductors “ Cryogenic Stabilization, an invited article in Engineering Superconductivity (Edited by P.J. Lee), Wiley-Interscience, New York, pp. 204-218. (see also A7 and A4)

Till 1999

• Sekulic, D.P. and Edeskuty, F, J. (1999) Cryogenic Stabilization, an invited article in Wiley Encyclopedia of Electrical and Electronics Engineering, John Wiley & Sons, New York, Volume 21, pp.45-58 (this work is published in a separate book in 2001, see ref. A5; A new revised edition listed in 2006, see Ref. A7). 
• D.P. Sekulic (1999) Behavior of a Molten Aluminum Micro Layer During Brazing, an invited article in Recent Research Developments in Heat, Mass & Momentum Transfer, Research Signpost Publ., Trivandrum, Vol. 2, pp. 121-140.
• Shah, R.K. and Sekulic, D.P. (1998) Heat Exchangers, an invited chapter in Handbook of Heat Transfer, McGraw Hill, 3rd Edition (Edited by W.M. Rohsenow, J.P. Hartnett and Y.I. Cho), Chapter 17, pp. 17.1-17.169.
• Sekulic, D.P. and Shah, R.K. (1995) Thermal Design Theory of a Three-Fluid Heat Exchanger, an invited chapter in Advances In Heat Transfer, Academic Press, San Diego; London, Vol. 26, pp. 219- 328.http://www.harcourt-international.com/catalogue/title.cfm?ISBN=0120200260

• M. D. Krivilyov, S. Dj. Mesarovic, D. P. Sekulic, Phase-field model of interface migration and powder consolidation in additive manufacturing of metals, Journal of Materials Science, v 52, n 8, p 4155-4163, April 1, 2017
• D. P. Sekulic, H. Fu, A. Rabinkin, D. Busbaher, E. Leone, T. Preuss, Microstructure refining of a Mo-Ni brazing filler by nanoparticles doping, Welding Journal, v 96, n 1, p 11s-20s, January 2017
• R. Pan, P. He, T. Lin, D. P. Sekulic, Z. Huang, H. Wei, Z. Yang, Cross-diffusion phenomena within a ZrCx joint, Journal of the European Ceramic Society, v 37, n 8, p 2779-2786, July 1, 2017
• J. Yang, S. Xue, Y. Wu, C.-N. Yu, D. P. Sekulic, Wetting behaviour of Zn-Al filler metal on a stainless steel substrate, Science and Technology of Welding and Joining, p 1-6, April 18, 2017 (article in press)
• J. Yang, S. Xue, D. P. Sekulic, An Impact of Zirconium Doping of Zn-Al Braze on the Aluminum-Stainless Steel Joints Integrity During Aging, Journal of Materials Engineering and Performance, v 26, n 1, p 358-365, January 1, 2017
• H. Fu, M. Dehsara, M. Krivilyov, S. Dj. Mesarovic, D. P. Sekulic, Kinetics of the molten triple line movement during a brazed joint formation, Journal of Materials Science, v 51, n 4, p 1798-1812, February 1, 2016
• Y. Li, X. Yu, D. P. Sekulic, X. Hu, M. Yan, R. Hu, A study of the microstructure, thermal properties and wetting kinetics of  lead-free solders, Applied Physics A: Materials Science and Processing, v 122, n 6, June 1, 2016
• R. Pan, S. Kovacevic, T. Lin, P. He, D. P. Sekulic, S. Dj. Mesarovic, Z. Yang, Y. Shen, H. Wei, Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti + Mo composite interlayer, Materials and Design, v 99, p 193-200, June 05, 2016
• R. Pan, H. Wei, T. Lin, P. He, D. P. Sekulic, Q. Wang, X. Duan, Homogenization of the zirconium carbide-titanium interface domain, Scripta Materialia, v 112, p 42-45, February 2016
• C. Zhao, Y. Li, W. Liu, D. P. Sekulic, Wetting kinetics of AgCuTi filler metal over the TiAl-based alloy substrate under controlled atmosphere conditions, Hanjie Xuebao/Transactions of the China Welding Institution, v 36, n 8, p 79-83, August 25, 2015
• Y. Li, C. Wen, Y. Sun, W. Liu, D. P. Sekulic, D.P. (2015) Wetting kinetics of the AgCuTi filler metal on pure Molybdenum substrate, Surface and Interface Analysis, v 47, n 8, p 838-843, August 1, 2015
• Sekulic, D.P., Sciubba, E., and Moran, M.J. (2015) Entransy: A misleading concept for the analysis and optimization of thermal systems, Energy, Vol. 80, pp. 251-253.
• Sekulic, D.P., Nehete, R., Yu, C-N., Fu, H. (2014) An energy sustainability metric, Energy, Vol. 74, 2014, pp. 37-44
• Li, Y., Liu, W., Zhao, C; Hu, X.W., Sekulic, D.P. (2014) Mechanical response of reaction phases of the TiAl/steel brazed joint under a tensile load, Journal of Materials Science, Volume: 49, No., 3 pp. 1114-1120
• Li, Y., Liu, W., He., P., Jicai, F., Sekulic, D.P. (2013) Dissolution of TiAl alloy during high temperature brazing, Journal of Materials Science, March 19, 2013 On Line DOI 10.1007/s10853-013- 7315-8; J. Mater. Sci. (2013) 48:5247-5252
• Li, Y., Liu, W., Sekulic, D.P. and He, P., (2012) Reactive wetting of AgCuTi filler metal on the TiAl-based alloy substrate, Applied Surface Science, 2012, Vol. 250, pp. 343-348.
• W. Liu, L. Lu, Y. Li, Y. Cai and D. P. Sekulic (2012) Preferential Spreading of Molten Metal on an Anisotropic Microstructured Surface, Europhysics Letters, 2012, Vol. 97, pp. 46003-p1-p6.
• W. Liu and D. P. Sekulic (2011) Anisotropic Spreading of Liquid Metal on an Intermetallic Surface, Theoretical and Applied Mechanics, 38(4), pp 365-377, (Invited paper)
• W. Liu, Y. Li, Y. Cai and D. P. Sekulic (2011) Capillary Rise of Liquids over a Microstructured Solid Surface, Langmuir, 27(23), pp 14260-14266.
• W. Liu, D.P. Sekulic (2011) Capillary driven molten metal flow over topographically complex substrates, Langmuir, Vol. 27, pp. 6720-6730; On line DOI: 10.1021/la201091u; Publ. Date April 28, 2011.
• D.P. Sekulic (2011) Wetting and Spreading of Liquid Metals Through open Micro Grooves and Surface Alterations, Heat Transfer Engineering, Hard Copy 2011, Vol. 32, Issues 7 & 8, pp. 1-11; (Posted on line edition: December 04, 2010).
• M. Chen, Yuanning, J., Sekulic, D.P., Zhao, H. (2010) Wetting Kinetics of SiC nanoparticle reinforced Sn-Pb eutiectic solders, China Welding, Vol. 19, No. 3, pp. 16-20.

2000-2009

• H. Wang, D. P. Sekulic, H. Zhao, X. Zhang, (2009) Wetting kinetics of Sn-Pb eutectic solder on Cu and Cu-Sn intermetallics substrates, The Chinese Journal of Nonferrous Metals, Vol. 19, No. 12, pp. 2186-2191.
• H. Zhao,H.Q. Wang, D.P. Sekulic, and Y.Y. Qian (2009) Spreading Kinetics of Liquid Solders over an Intermetallic Solid Surface. Part 1: Eutectic Lead Solder, Journal of Electronic Materials, Vol. 38, no.9, pp.1838-1845.
• H. Zhao,H.Q. Wang, D.P. Sekulic, and Y.Y. Qian (2009) Spreading Kinetics of Liquid Solders over an Intermetallic Solid Surface. Part 2: Lead-free Solders, Journal of Electronic Materials, Vol. 38, no.9, pp.1846-1854.
• T. G. Gutowski, M.S. Branham, J.B. Dahmus, A.J. Jones, A. Thiriez, and D.P. Sekulic (2009), Thermodynamic Analysis of Resources Used in Manufacturing Processes, Environmental Science & Technology, Vol. 43, pp. 1584-1590.
• H. Zhao, D.R. Nalagatla, D.P. Sekulic (2009) Wetting Kinetics of Eutectic Lead and Lead-free Solders: Spreading over the Cu Surface, Journal of Electronic Materials, Vol. 38, no. 2, pp. 284-291.
• H. Zhao, A.J. Salazar, and D.P. Sekulic (2009) Analysis of Fin-Tube Joints in a Compact Heat Exchanger, Heat Transfer Engineering, Vol. 30, 2009, pp. 931-940.
• D.P. Sekulic (2009) An entropy generation metric for non-energy systems assessments, Energy, Vol. 34, pp. 587-592
• H. Wang, H Zhao, D. P. Sekulic, Y. Qian (2008) A Comparative Study of Reactive Wetting of Lead and Lead-Free Solders on Cu and (Cu6Sn5/Cu3Sn)/Cu Substrates, Journal of Electronic Materials. Vol. 38, 2008, pp. 1640-1647 (Online first: http://www.springerlink.com/content/c708453421303754/fulltext.pdf)
• H. Zhao and D.P. Sekulic (2008) Wetting Kinetics of a Hypo-Eutectic Al - Si System, Materials Letters Vol. 62, No. 15, May 2008, pp. 2241-2244.
• A. Shapiro and D.P. Sekulic (2008) A New Approach to Quantitative Evaluation of a Design for Brazed Structures, Welding Journal, Research Supplement, Vo. 87, 2008, pp. s-1 - s-10.
• H. Zhao, and D.P. Sekulic (2006) Diffusion-Controlled Melting and Re-solidification of Metal Micro Layers on a Reactive Substrate, Heat Mass Transfer, Special issue (Ed. Prof. C Amon), Vol. 42, pp. 464-469 (See also B53)
• D.P. Sekulic and J. Sankara, (2006) Advanced Thermodynamics Metrics for Sustainability Assessments of Open Engineering Systems, (an invited article in a special issue in Honor of Prof. Adrian Bejan, Duke University), Thermal Science, Vol. 10, No. 1, pp. 125-140.
• Sekulic, D.P., Galenko, P.K., Krivilyov, M.D., Walker, L, and Gao, F. (2005) Dendritic Growth in Al-Si Alloys During Brazing. Part 1: Experimental Evidence and Kinetics, International Journal of Heat and Mass Transfer, Vol. 48, 2005, pp. 2385-2396
• Sekulic, D.P., Galenko, P.K., Krivilyov, M.D., Walker, L, and Gao, F. (2005) Dendritic Growth in Al-Si Alloys During Brazing. Part 2: Computational Modeling, International Journal of Heat and Mass Transfer, Vol. 48, 2005, pp. 2372-2384.
• H. Zhao and Sekulic, D.P., (2005) Diffusion-Controlled Melting and Re-Solidification of Micro Metal Layers on a Reactive Substrate, Heat and Mass Transfer (Wärme und Stoffubertragüng), FirstOnline (Springer), ISSN 1432-1181 (online), Special Issue, http://www.springerlink.com/app/home/issue.asp. (See B57 for an archival hard copy version)
• Sekulic, D.P., Gao, F., Zhao, H., Zellmer, B., and Qian, Y.Y. (2004) Prediction of the Fillet Mass and Topology of Aluminum Brazed Joints, Welding Journal, Research Supplement, Vol. 83, No. 3, pp. 102s - 110s.
• Gao, F., Sekulic, D.P., Qian, Y.Y., and Morris, J.G. (2004) Formation of Micro Layers of Clad Residue on an Aluminum Brazing Sheet During Melting and Re-Solidification in a Brazing Process, Materials Science and Technology, Vol. 20 No. 5, pp. 577 — 584.
• Gao, F., Sekulic, D.P., Qian, Y., and Ma X. (2003) Residual clad formation and aluminum brazed joint topology prediction, Materials Letters, Vol. 57, pp. 4592-4596.
• Sekulic, D.P., Salazar, A.J., Gao, F., Rosen, J.S., and Hutchins, H.S. (2003) Local transient behavior of a compact heat exchanger core during brazing, Equivalent Zonal (EZ) Approach, Int. Journal of Heat Exchangers, Vol. 4, No. 1, pp.91-108. (see C42 for a conference article published in an edited book edition).
• Qian, Y.Y., Gao, F., Sekulic, D.P., Ma, X., and Yoshida, F. (2003) Determination of Elastoplastic Properties of Individual Phase in Solidified Al Brazed Joint, Transactions of Nonferrous Metals Society of China, Vol. 13, No. 3, pp. 5-8.
• Sekulic, D.P., Gao, F. Qian, YY, Zhao, H. (2003) Diffusion Behavior of Silicon at Interface of Al Clad Sheet and Joint Formation, Transactions of Nonferrous Metals Society of China, Vol. 13, No. 3, pp. 9-13.
• Gao, F., Qian, Y.Y., Sekulic, D.P. Ma, X., and Yoshida, F., (2003) (C*) Microstructures Characteristics and Properties of Solidified Aluminum Alloy Brazed Joint, Transactions of Nonferrous Metals Society of China, Vol. 13, No. 5, pp. 1146-1150.
• Gao, F., Qian, Y.Y., Sekulic, D.P., Ma, Xin., and Yoshida, F. (2003) Topological Dependence of Mechanical Responses of Solidification Microstructures in Aluminum Brazed Joints, Transactions of Nonferrous Metals Society of China, Vol. 13, No. 6, pp. 1296-1300.
• Gao, F., Zhao, H., Sekulic, D.P. Qian, Y, and Walker, L. (2002) Solid state Si diffusion and joint formation involving aluminum brazing sheet, Materials Science & Engineering A, Vol. 337, nos. 1-2, pp 228-235.
• Pan, C-X, and Sekulic, D.P. (2002) (C*) Microstructural Characteristics of AA4343/AA3003 Al- alloy brazing sheet joints, Chinese Journal of Nonferrous Metals, Vol. 12, No. 3, pp. 482-2002.
• Sekulic, D.P. (2001) Molten Aluminum Equilibrium Membrane Formed During Controlled Atmosphere Brazing, International Journal of Engineering Science, Vol. 39, pp. 229 - 241.
• Zellmer, B., Nigro, N., and Sekulic, D.P. (2001) Numerical Modelling and Experimental Verification of the Formation of 2D and 3D Brazed Joints, Modelling and Simulation in Materials Science and Engineering, Vol. 9, pp. 339 - 355.
• Sekulic, D.P., Zellmer, B., and Nigro, N. (2001) Influence of Joint Topology on the Formation of Brazed Joints, Modelling and Simulation in Materials Science and Engineering, Vol. 9, pp. 357 - 369. 
• Sekulic, D.P. (2001) Response to Comment on -A fallacious argument in the finite time thermodynamics concept of endoreversibility, Journal of Applied Physics, Vol. 90, p. 185. 
• Richardson, D.H., Sekulic, D.P., and Campo, A. (2000), Low Reynolds Number Flow Inside Straight Micro Channels With Irregular Cross Sections, Heat and Mass Transfer, Vol. 36, pp. 187-193.
• Sekulic, D.P. (2000), A Unified Approach to Evaluation of Temperature Distributions and Effectiveness of Unidirectional and Bi-directional Parallel Flow Arrangements, Mechanical Engineering Education, An International Journal, Vol. 28, pp. 307 - 320. 

Invited, Printed Reviews

• Sekulic, D.P. (2003) Boundary Element Methods for Heat Conduction: With Applications in Non- Homogeneous Media, by E.A. Divo and A.J. Kassab, Applied Mechanics Reviews, Vol. 56, No. 6, pp. B83-B84.
• Sekulic, D.P. (2002) Advanced Boundary Elements for Heat Transfer by M.T. Ibanez and H. Power, Applied Mechanics Reviews, Vol. 55, No. 5, pp. B98-B99.
• Sekulic, D.P. (2001) Introduction to Engineering Thermodynamics by R.E. Sontag and C. Borgnakke, Applied Mechanics Reviews, Vol. 54, No. 3, pp. B50-B51.
• Sekulic, D.P. (2001) Extended Surface Heat Transfer by A.D. Kraus, A. Aziz, and J. Welty, Applied Mechanics Reviews, Vol. 54, No. 5, pp. B92-B93.
• Sekulic, D.P. (2000) Thermodynamics: Processes and Applications; by E. Logan, Applied Mechanics Reviews, Vol. 53, No. 2, pp. B16-B-17.

• D. K. Hawksworth, D. P. Sekulic, C.-N. Yu, H. Fu, R. G. J. Westerg (2015) A Mechanistic Study of Aluminium Controlled Atmosphere Brazing Processes, Proceedings of the 12th Vehicle Thermal Management Systems Conference and Exhibition, May 10-13, Nottingham, United Kingdom
• F. Badurdeen, D.P. Sekulic, R. Gregory, A. Brown and H. Fu (2014) Developing and Teaching a Multidisciplinary Course in Systems Thinking for Sustainability: Lessons Learned through Two Iterations, American Society of Engineering Education, ASEE Indianapolis, June 15-18, 2014.
• Busbaher, D., Liu, W., Sekulic, D.P., (2013) Wetting and Micro-Structural Variations of Nano- Composite Brazing Fillers for Dispenser Cathode Manufacturing, 14th IVEC, 21-23 May, Paris, IEEE.
• Sekulic, D.P. (2013) Kinetics of a Brazed Joint Formation: Experiments and Theory, Keynote Lecture, 5th International Conference on Welding Science and Engineering, Weihai, China June 11-14, 2013
• G.A. Luhan, F. Badurdeen, R. Gregory, M. Schroeder, L. Vincent, and D. P. Sekulic (2013), Reframing Interdisciplinary Approaches to Systems Thinking for Sustainability, Proceedings of the International Symposium on Sustainable Systems & Technologies ISSST2013 May 15 - 17, Cincinnati, OH USA, Paper: ISSST 2013 - 159.
• R. Nehete, C.-N. Yu and D. P. Sekulic (2013) Limits of energy resources use in traditional technological processes: A general approach and a metal bonding case study, Proceedings of the International Symposium on Sustainable Systems & Technologies ISSST2013, May 15 - 17, Cincinnati, OH USA, Paper: ISSST 2013- 160.
• C.-N. Yu, D. K. Hawksworth, D.P. Sekulic (2013). An analysis of an impact of the background atmosphere on THE aluminum brazing joint formation, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, November 13-21, 2013, San Diego, California, USA, Paper: IMECE2013-64776.
• H. Fu, F. Dong, D.P. Sekulic, S.Dj. Mesarovic, M. Krivilyov (2013) Surface Tension Driven Kinetics of the Triple Line of a Liquid Metal Free Surface, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, November 13-21, 2013, San Diego, California, USA, Paper: IMECE2013-62945.
• R. Nehete, C.-N.Yu, H. Fu, and D. P. Sekulic (2013) Energy Resource Use: Sustainability Metric of a Manufacturing Process Proceedings of ECOS 2013 – The 26th International Conference of efficiency, cost, optimization, simulation and environmental impact of energy systems, July 16-19, 2013, Guilin, China, Paper P012, Session 26 Energy and manufacturing, New routes to sustainability, pp. 1-6
• Badurdeen, F., Gregory, R., Luhan, G.A., Schroeder, M., Vincent, L.V and Sekulic, D.P., (2012) Systems Thinking for Sustainability: Envisioning Trans-disciplinary Transformations in STEM Education, International Symposium On Sustainable Systems & Technologies, ISSST2012, Boston, MA, May 16-18, 2012, pp. 1-6.
• M. Chen, H. Zhao, W. Liu, D. P. Sekulic (2012) Wettability of a Cu-nanoparticle-reinforced solder matrix paste composite, International Brazing and Soldering Conference, Las Vegas, ASM-AWS, 2012, in print, CD.
• Y. Li, W. Liu, D. P. Sekulic (2012) Mechanical Response and Fracture Behavior of the TiAl/Steel Brazed Joint, International Brazing and Soldering Conference, Las Vegas, ASM-AWS, 2012, accepted, in print, CD
• C-N Yu, D. Hawksworth, W. Liu, D. P. Sekulic (2012) Al brazing under severe alterations of the background atmosphere: A new vs. traditional brazing sheet, International Brazing and Soldering Conference, ASM-AWS Las Vegas, 2012, in print, CD
• W. Liu, D. Busbaher, Y. Li, D. P. Sekulic (2012) Homogeneous and heterogeneous Mo-Ni fillers doped with nanoparticles, International Brazing and Soldering Conference, Las Vegas, ASM-AWS 2012, in print, CD Edition.
• D. Busbaher, Liu, W., Sekulic, D.P. (2012) Mechanical properties of nanoparticles reinforced Mo- Ni braze for a dispenser cathode application, 2012 IEEE International Vacuum Electronics Conference, IVEC 2012.
• M. Schwindel, B. Young, T. Henninger, J. Sottile, and D.P. Sekulic (2011) Exergy mapping of Materials Processing: Material Separation in a Manufacturing Case Study, 24th Int. Conf. on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, July 4-7, 2011, Novi Sad, Serbia, Electronic Proceeding Edition.
• D. Busbaher, W. Liu, D. Moecher and D.P. Sekulic, (2011) High Temperature Brazing of Porous Tungsten with Nano-structured Mo-Ni for a Dispenser Cathode Application, IEEE Int. Vacuum Electronics Conference, 12 IVEC 2011, Bangalore, India, February 21-24, 2011, pp. 323-324.
• S. Subramaniam and D.P. Sekulic (2010) Balancing Material and Exergy Flows for a PCB Soldering Process: Method and a Case Study, IEEE/ISSST (IEEE International Symposium on Sustainable Systems and technology), Washington, DC., May 16-19, CD Edition.
• T.G. Gutowski, J.Y.H. Liow, and D.P. Sekulic (2010) Minimum Exergy Requirements for the Manufacturing of Carbon Nanotubes, IEEE/ISSST (IEEE International Symposium on Sustainable Systems and technology), Washington, DC., May 16-19, CD Edition.
• D. Busbaher, W. Liu, and D.P. Sekulic, (2010) High Temperature Brazing of Mo/Mo-Re with a nano-composite Mo-Ni filler, DVS Berichte, Vol. 263, 2010, pp. 211-214.
• D. Busbaher, W. Liu and D.P. Sekulic, (2010) High Temperature Brazing using Nano-Particles Doped Filler Metal for Dispenser Cathode Application, IEEE Int. Vacuum Electronics Conference, 11 IVEC 2010, Monterey, CA, May 18-20, 2010, pp. 151-152.

2000-2009

• D. P. Sekulic (2009) Wetting and Spreading of Liquid Metals through Open Micro Grooves and Surface Alterations, Keynote Paper, 7th Int. ASME Conf. on Nanochannels, Microchannels and Minichannels, ICNMM2009, Pohang, S. Korea, CD Proceedings, ASME Paper ICNMM2009-82149.
• M. Chen, H. Zhao, W. Liu , D. P. Sekulic, (2009) Spreading of Nano Composites of Liquid Metals, 2nd. Int. Congress of Serbian Society of Mechanics, Palic, Edited by T. Atanackovic, D. Spasic, and S. Simic, CD Proceedings (ISBN 978-86-7892-173-5).
• T. G. Gutowski, D. P. Sekulic , and B. R. Bakshi (2009) Preliminary Thoughts on the Application of Thermodynamics to the Development of Sustainability Criteria, Proceedings of the 2009 IEEE The International Symposium on Sustainable Systems & Technology (ISSST Phoenix AZ, May 18-20), Session 8, Paper 126, CD Edition, IEEE.
• H. Zhao, D.P. Sekulic (2009) The influence of surface topography on wetting kinetics of solders and brazes, Brazing and Soldering, Proc. Of the 4th Int. Brazing and Soldering Conference, Edited by A. rabinkin, R. Gourley, and C. Walker, ASM International & AWS, Miami, FL & Materials Park, OH, pp. 314-323.
• D.P. Sekulic, Y.M. Dakhoul, H. Zhao, W. Liu (2009) Aluminum foam compact heat exchanger: Brazing technology development vs. thermal performance, Cellular Metals for Structural and Functional Applications, Edited by G. Stephani and B. Kieback, CELMET 2008, Fraunhofer, IFAM Dresden, 2009.
• D.P. Sekulic, Y.M. Dakhoul, H. Zhao, and W. Liu (2008) Aluminum Foam Compact Heat Exchanger: Brazing Technology Development vs. Thermal Performance, CELLMET 2008, 2nd Int. Symposium on Cellular Metals for Structural and Functional Applications, Fraunhofer Institute for Manufacturing and Advanced Materials, October 8-10, 2008, Dresden, Germany, pp.5-10.
• M. Branham, T.G. Gutowski, A. Jones, and D.P. Sekulic (2008) A Thermodynamic Framework for Analyzing and Improving Manufacturing Processes, 2008 IEEE International Symposium on Electronics and the Environment, May 19-21, 2008, San Francisco, CD Edition.
• H. Zhao, D.R. Nalagatla, D.P. Sekulic (2008) Wetting Kinetics of Eutectic Lead and Lead-Free Solders: Spreading over Cu Surface, TMS 2008 137 Annual Meeting & Exhibition, March 9-13, New Orleans, LO, Collected Proceedings, Emerging Interconnect and Packaging Technologies, Pb-Free Solders, CD Edition.
• D.P. Sekulic, H. Zhao, and W. Liu (2008) A Thermodynamic Metric for Process Quality Assessment in Manufacturing: Pb vs. Pb-free Solders Spreading Case Study, 2008 IEEE International Symposium on Electronics and the Environment, May 19-21, 2008, San Francisco, CD Edition
• Sekulic, D.P. (2007) Scaling of Molten Metal Brazing Phenomena: Prolegomena for Model Formulation, "Progress in Scale Modeling": Selected papers from International Symposia on Scale Modeling (ISSM), 1997-2006, Special Volume (Edited by K. Saito et al), in print; This is an archival, modified version of the paper: Sekulic, D. P. (2000) Molten metal micro layer prior to joint formation during brazing. Prolegomena for scaling analysis, presented at the 3rd Int. Symposium on Scale Modeling, Nagoya, JSME, Japan (see C37 for an early conference lecture.)
• Sekulic, D.P., Zhao, H., and Hadinata, P., (2007) Real Time Monitoring and Modeling of Reactive Flow of Molten Metal Through Micro Surface Alterations During Brazing, DVS Berichte, Vol 243, pp. 272-276, ISBN 978-3-87155-799-6; CD Edition Hart-und Hochtemperaturlten un Diffusionschweiβ DVS Verlag; also in: Sekulic, D.P., Zhao, H., and Hadinata, P., (2007) Real Time Monitoring and Modeling of Reactive Flow of Molten Metal Through Micro Surface Alterations During Brazing, Brazing, High Temperature Brazing and Diffusion Welding, 8th International LOT Conference, Aachen, June 19-21, 2007, DVS – Verlag, Dusseldorf, CD Edition.
• Sekulic, D.P. (2007) Entropy Generation Metrics for Non-energy System Assessments, paper #271, CD Proceedings, 4th Dubrovnik Conference on Sustainable Development of Energy, Water and Environmental Systems, Edited by Z. Guzovic, N. Duic, and M. Ban, CD Edition, ISBN 10: 953-6313- 87-1.
• Sekulic, D.P., Salazar, A., Omar, M., and Zhao, H. (2006) Spatially Distributed Microwave Heating for Advanced Materials Processing, 113th International Heat Transfer Conference IHTC-13, Sydney, Australia, 13-18 August 2006, CD Edition. Also: Sekulic, D.P., Salazar, A., Omar, M., and Zhao, H. (2006) Spatially Distributes Microwave Heating for Advanced Materials Processing, in 13th Int. Heat Transfer Conference Proceedings (Edited by De Vahl Davis and E. Leonardi), Sydney, Australia, August 13-18th, Paper # MPR-10, pp. 1-10. Begel House, Inc. ISBN 1-56700-226-9
• Zhao, H., Zbrozek, A., and Sekulic, D.P., (2006) Surface Tension Driven Molten Metal Flow over Flat and/or Grooved Reactive Surfaces During Brazing and Soldering, Brazing and Soldering (Edited by J.J. Stephens, and K. S. Weil) 3rd International Brazing & Soldering Conference (IBSC), April 23-26, 2006, San Antonio, Texas, USA, ASM International, Materials Park, OH, AWS, Miami, FL, pp. 197-202.
• Zhao, H., and Sekulic, D.P., (2005) Isothermal Solidification of Micro layers of Molten Aluminum Alloys (Paper: HT2005-72205), 2005 Summer Heat Transfer Conference- ASME, July 17-22, 2005, San Francisco, CA; CD Edition, ASME.
• Krivilyov, M.D., Galenko, P.K. and Sekulic, D.P. (2004) Modeling of α - Phase Dendritic Patterns During Aluminum Brazing in an Al - Si Alloy, DVS Berichte, Vol.231, pp. 126-129, ISBN 3-87155-685- 8; Also: Krivilyov, M.D., Galenko, P.K. and Sekulic, D.P. (2004) Modeling of α - Phase Dendritic Patterns During Aluminum Brazing in an Al - Si Alloy, Hart und Hochtemperaturloten und Diffusionssweissen (Brazing, High Temperature Brazing and Diffusion Bonding), 7th International LOT 2004 Conference - CD Edition, DVS Verlag, Dusseldorf
• H. Zhao and D.P. Sekulic (2004) Non-equilibrium diffusion controlled melting and re-solidification of thin metal layers on a reactive substrate, Thermal Science 2004, Proc. of the ASME-ZSIS - Int. Thermal Science Seminar II, Edited by A.E. Bergles, I. Golobic, C.H. Amon, and A. Bejan, ZSIS, Ljubljana, pp.217-222.
• Sankara, J., and Sekulic, D.P., (2004) Irreversibility Approach for Sustainability Analysis of a Netshape Manufacturing System, 2004 ASME International Mechanical Engineering Congress Proceedings, Nov. 13-19, Anaheim, CA, 2004, IMECE2004, Vol. 3, ASME, Paper IMECE2004-61592 , CD Ed., pp.1-7.
• D.P. Sekulic, A.T. Male, J.G. Morris, N. Nigro, A.J. Salazar, H. Zhao, F. Gao, and B. Zellmer (2004) Modeling of the Deterministic Links in a Sequence of CAB aluminum Brazing, 2004 National Science Foundation Design, Service and Manufacture Industrial Innovation Grantees and Research Conference, Conference Papers – CD Edition, Edited by. R. Kovacevic, Southern Methodist University, Dallas, DMI-#9908319, pp. 1- 10.
• Zhao, H., Salazar A. J. and Sekulic, D.P. (2003) Influence of Topological Characteristics of a Brazed Joint Formation on Joint Thermal Integrity, Proc. Of ASME Int. Mechanical Engineering Congress, Paper IMECE2003-43885, CD Edition, pp. 1-9.
• Sekulic, D.P., Ma, X., Yoshida, F., Gao, F., and Qian, Y. (2003) Micromechanical Properties vs. Solidification Microstructures of CAB Aluminum Joint Formations, 2nd Int. Brazing and Soldering Conference, February 17-19, San Diego, CA, American Welding Society - ASM International, CD Edition, Paper. 11.7.
• Zhao, H., and Sekulic, D.P. (2003) Modeling of the Influence of Microstructure Scale on the Re- Solidification of Micro Layers of a Molten Aluminum Alloy, Proceedings of the Fourth International Symposium on Scale Modeling, ISSM-IV, NCMR-NASA, Cleveland, pp. 291 - 301 (CD Edition).
• Gao F., Ma, X., Yoshida, F., Qian, Y.Y., and Sekulic, D.P. (2003) Topological Dependence of Mechanical Responses of Solidification Microstructures Formed During Aluminum Brazing, 2003 NSF Design, Service and Manufacturing Grantees and Research Conference Proceedings, Edited by. R.G. Reddy, The University of Alabama, Tuscaloosa, AL, pp. 2288-2291 (CD Edition).
• Sekulic, D.P. (2002) A Heuristic Thermodynamic Interpretation of a Mechanism Responsible for the Selection of Solidification Microstructures, Proc. of the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, New Orleans, Louisiana, CD Edition, Vol. 3, Paper: IMECE 2002 – 39521.
• F. Gao, L. Walker, and D.P. Sekulic (2002) Silicon Diffusion Patterns in the Vicinity of a Clad- Core Interface of an Aluminum Brazed Joint, Proc.of the 2002 NSF Design, Service and Manufacturig Grantees and Research Conference, San Juan, Puerto Rico, CD edition, EPP, Iowa State University, 2002.
• H. Zhao, and D.P. Sekulic (2001) "Brazed Fin-Tube Joint Thermal Integrity vs. Joint Formation, Proc.of the 2001 NSF Design, Service and Manufacturig Grantees and Research Conference, CD edition, EPP, University of Washington.
• Sekulic, D.P., Salazar, A.J., Gao, F., Rosen, J.S., and Hutchins, H.F. (2001) Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics 2001, Vol. 1, Edited by G.P. Celata, P.Di. Marco, A. Goulas, and A. Mariani, Edizioni ETS, Pisa, pp. 803-808. [Also a lecture presented at the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, September 2001, Thessaloniki, Greece.], ISBN 88-467-0459-2 (See B49 - an archival version).
• Sekulic, D.P., Pan, C., Gao, F., and Male, A.T. (2001) Modeling of Molten Cladding Flow and Diffusion of Si Across a Clad-Core Interface of an Aluminum Brazing Sheet, DVS - Berichte, Vol. 212, pp. 204 - 219. [Also a Lecture presented at the 6th Int. Conf. On Brazing, High Temp. Brazing and Diffusion Bonding, "Deutcher Verband Fur Schweissen und verwandte Verfahren, e.V.," Aachen, Germany, May 8-10 (2001)], ISBN 3-87155-670-X
• F. Gao, H. Zhao, D.P. Sekulic, Y. Qian, and L. Walker (2001) Si Diffusion and Joint Formation Involving Aluminum Brazing Sheet, Proc. of the 2001 Int. Brazing and Soldering Conference, Edited by H. Liu, and Z. Li., HIT, Harbin, pp. 161-168. [Also a Lecture presented at the IBSC 2001, Yangzhong, China, October 2001.]
• D.P. Sekulic and R.K. Shah (2000) Thermodynamic Analysis for Thermal Design, Manufacturing, and Operation of Heat Exchangers, an invited article, published in Heat and Mass Transfer 2000 (edited by M.S. Loknath et al.), Tata McGraw-Hill Publishing House, New Delhi and New York, pp. 139-151. [Presented also as an Invited Lecture at the Fourth ISHMT-ASME HMT Conference - IAT, Pune, India, January, 2000. http://www.tatamcgrawhill.com/catalog/fratmh.asp?source=class.asp
• Sekulic, D.P. (2000) Modeling of the Brazed Joint Shape Topology for Complex Mating Surfaces, Advanced Brazing and Soldering Technologies, ASM International, pp. 419-426.
• D.P. Sekulic (2000) Molten Metal Micro Layer Prior to Joint Formation During Brazing. A Prolegomena for Scaling Analysis, Proc. Of the Third Int. Symp. On Scale Modeling, Nagoya, Japan, JSME, CD Edition, pp. 86-93. (See C59 for a modified archival version). Conference Presentations with Refereed Abstracts

• Impact of Process Conditions on Trillium Brazed Joint Formation (D. P. Sekulic, P.I.) Sapa Heat Transfer AB, Mississauga, Ontario, Canada, July 2013
• Brazing High Temperature Refractory Metals with Nanocomposite Fillers (D.P. Sekulic, P.I.) Semicon Associates, Lexington, KY, December 2010.
• Analysis of Brazeability of Trillium Brazing Sheet (D.P. Sekulic, P.I.) Sapa Heat Transfer AB, Mississauga, Ontariao, Canada, February 2010.
• Innovative Approach to Materials Joining in a Microwave Field, KSEF, R&D Excellence Project, RFP# KSEF-395-RDE-005 (2004-2005), PI D.P. Sekulic, 2005
• Exergo Environomic Synthesis of Advanced Manufacturing Processes, KSEF, R&D Excellence Project RFP# KSEF-395-RDE-003, (2003-2004) P.I. D.P. Sekulic, 2004.
• Analysis of Brazeability of Selected Brazing Sheet Materials (D.P. Sekulic, P.I.) Pechiney Rolled Products, Ravenswood, WV, January 2002.
• Modeling of Joint Formation in Aluminum Brazing – Behavior and Control of Molten Cladding (D.P. Sekulic, Principal investigator, A.T. Male and J.G. Morris, Co-principal investigators), (1999-2002) NSF-DMI-9908319, 2002.
• Continuous Casting Al Brazing Sheet (D.P. Sekulic, Principal Investigator), (1999-2002), Commonwealth Aluminum, Louisville, KY, 2002.
• Optimum Cladding Distribution and Brazed Joint Formation – Gen II HTC-GMT800 (D.P. Sekulic, Principal Investigator), (1999-2000) DELPHI Harrison Thermal Systems, Lockport, NY

• D.P. Sekulic, Kinetics of Wetting and Spreading of Liquid Metals and Nano-Composite Metal Systems, MME Symposium Series, School of mechanical and Materials Engineering, Washington State University, Pullman, WA, February 11, 2010.
• D.P. Sekulic, Kinetics of Wetting and Spreading of Liquid Metals: Nano-Composite Metal Systems During Brazing and Soldering, Faculty of Mechanical Engineering Seminar, Technical University Dortmund, Dortmund, Germany, November 2009.
• D.P. Sekulic, Spreading of Lead and Lead-free solders over an Intermetallic Surface, Lecture 1, Harbin Institute of Technology; Nano Composites Solders Spreading, Lecture 2; Design for Brazing Metallic and Carbon Foams & Nano-Composite Brazes, Lecture 3; Wetting and Spreading of Liquid Metals through open micro Grooves and Surface Alterations (Brazes and Soldering Cases). Lecture 4. June 2009, China
• D.P. Sekulic, H. Zhao, Molten Metal Surface Tension Driven Flows: Understanding Brazing of Aluminum Compact Heat Exchangers for HVAC&R, University of Illinois, Seminar, Department of Mechanical Engineering, Urbana-Champagne, 2009.
• D.P. Sekulic, Spreading of Liquid Metals over Intermetalic Surfaces, Shandong University Jinan, China, June 2009.
• D.P. Sekulic, Thermodynamics Tools for Resources Utilization Analysis in Manufacturing, Massachusetts Institute of Technology, Cambridge, MA, May 2008.
• D.P. Sekulic, Two challenges to the theory of spreading of micro layers of liquid metal: Phenomenology and unsuccessful efforts to model the phenomena (Dva izazova makroskopskoj teoriji rasprostiranja mikro slojeva tečnog metala: fenomenologija i neuspeli pokuÅ¡aji teorijskog modeliranja), Academy of Sciences and Arts, SANU, Belgrade, Institute of Mathematics, Mechanics Seminar, Belgrade, June 2007.
• D.P. Sekulic, Aluminum Brazing, Series of 10 lectures at the Harbin Institute of Technology, March 5-13, 2007 [Compact Heat Exchanger Design for Net-Shape Manufacturing by Brazing: Lesson 1a: Scope and Semantics; Lesson 1b: Introduction, Thermal Model of a Heat Exchanger; Lesson 2: Design vs. Manufacturing Issues; Lesson 3a and 3b: Thermal Hydraulic Design; Lesson 4: Problems involving design and impact on manufacturing, Lesson 5a: Manufacturing by Brazing: Process modeling; Lesson 5b: Manufacturing by brazing-Sustainability; Lesson 6a and 6b: Brazing Fundamentals: Aluminum Brazing, Lesson 7a and 7b: Modeling phenomena in and Al brazing sequence; Lesson 8: SS-Ti and C compact heat exchangers and brazing; Lesson 9: Brazing Process Design Assesment; Lesson 10:Future Designs and Needs for R&D.]
• D.P. Sekulic, R&D Issues involving manufacturing of compact heat exchangers made by brazing (Sekulic, D.P., and Zhao, H., presented by D.P. Sekulic), School of Mechanical and Power Engineering, Institute of Refrigeration and Cryogenics Seminar, Jiaotong University, Shanghai, 2007.
• D.P. Sekulic, Compact Heat Exchangers Design and Manufacturing, Caterpillar, Peoria, August 13-14, 2007 [Series of 10 lectures]
• D.P. Sekulic, Compact Heat Exchanger Design for Manufacturing, Honeywell, May 3-4, Torrance, CA, 2004. [Series of 10 lectures]
• D.P. Sekulic, Compact Heat Exchanger Design for Manufacturing, University of Kentucky Summer institute, [Series of 10 lectures on brazing and compact heat exchangers].
• D.P. Sekulic, Thermodynamic Analysis and Modeling of Complex Aluminum Structures Formation by Brazing, Thermal Engineering Department Seminar, Institute for Nuclear Sciences, Vinca, Serbia- Montenegro, August 2004.
• D.P. Sekulic, Compact Heat Exchangers for Automotive and Airspace Applications - Design for Manufacturing, College of Mechanical Engineering Seminar, University of Belgrade, Serbia- Montenegro, August 2004.
• D.P. Sekulic, Modeling of Kinetics of the Reactive Flow involving Phase Change Phenomena of Micro Layers of Molten Metal, Department of Mechanics Seminar, College of Engineering, University of Novi Sad, Serbia-Montenegro, July 2004
• D.P. Sekulic, Multidisciplinarity in Manufacturing R&D Programs: Brazing Research as an Example, Worchester Institute of Technology, Mechanical Engineering Department Seminar, Manufacturing Engineering, Worchester, MA, April 10, 2003
• D.P. Sekulic, Modeling of Transport Processes Involving Surface Tension Driven Micro Layers of Molten Metal Research Hypothesis Selection Vs. Theory Development, Chemical and MaterialsEngineering Department Seminar, University of Kentucky, Lexington, 2001.
• D.P. Sekulic, The Selection of Research Hypothesis vs. Research Objective, University of Novi Sad Scientific Forum - A keynote lecture, University of Novi Sad, Novi Sad, Yugoslavia, 2001
• D.P. Sekulic, Fundamental Research in Brazing, Department of Mechanical and Industrial Engineering Seminar, Marquette University, Milwaukee, 2000.